Southeast Specialty Products, LLC

5219 Hwy 90 W; Suite H

Mobile, AL  36619

Phone: 866-285-5339

www.sespecialty.com

SES IMAGE JET DARK 2 (BLUE GRID) – INSTRUCTIONS

PRINTING - The print side is the unprinted side of the sheet.  Follow your printer instructions for loading the sheet and feed one sheet at a time.  Print right side reading.  DO NOT MIRROR THE IMAGE.

Suggested Printer Settings are:

HP – Iron on Transfer at normal or best quality

Epson – 360 dpi ink jet paper or photo quality paper at 360 or 720 dpi

Canon – T-shirt transfer at default settings

Lexmark – Iron on Transfer at Best quality either 600 or 1200 dpi

            * not recommended for use in HP1200C or 1600C

Do not leave a margin around the edge of the image.  Any white material that is left will be transferred to the garment.  Round the edges, when possible to improve adhesion.  Carefully remove the paper backing by tearing a corner and peeling away from the front of the sheet.  You may want to tear a  corner and begin the peel prior to trimming away the excess white material.

TRANSFERRING THE IMAGE

HAND IRONING – The iron should be preheated to the hottest setting and be completely emptied of water and set to the dry setting.  Iron the shirt to remove any wrinkles and excess moisture.  Iron on a safe hard surface like a counter top.  Do not iron on a wood, glass or metal surface. Place the transfer face up on the garment and cover the entire image with the ironing sheet.  Iron, using light pressure, in straight lines vertically and horizontally over the entire image.  Make sure to overlap the edges.  A full page 8.5 x 11” will require 1.5 minutes of ironing and a half sheet will require 1 minutes.  IRON A SECOND TIME:  using firm pressure this time and the same technique and time as before. Fabric should cool completely and then the ironing sheet should be peeled using an even motion.

HEAT PRESS – Set the heat press to 350 degrees F.  Prepress fabric for a few seconds to remove wrinkle and excess moisture.  Allow the garment to cool.  Place the transfer face upon the garment and cover the transfer with the ironing sheet.  Using medium pressure, press for 20 seconds.  Allow transfer to cool before removing paper in an even motion.

LAUNDERING – It is recommended that you wait at least 24 hours prior to washing the garment for the first time.  For the initial wash, turn garment inside out and wash separately in cool water.  Immediately remove garment from washer and put in dryer at warm setting.  If left wet in washer the inks may bleed.  NEVER use bleach.  To iron the shirt, do not put iron directly on the transferred area.

STORAGE OF PAPER – Return unused portion of paper to a sealed bag.  Keep product in a cool dry environment away from heating and cooling sources.

Click here for pricing and to order or Call us at 1-866-285-5339!

*Always test to determine the suitability of any of the transfer papers for use in conjunction with your equipment or other products and methods. Printing characteristics and internal temperatures can change from printer to printer. The manufacturer's offer this information as guidelines in helping you determine suitability, however, the Seller's and Manufacturer's maximum obligation shall be to replace any paper which has proven to be defective. Neither the Seller nor the Manufacturer of these products shall be liable for any injury, direct or consequential, arising out of the use of, or inability to use these papers