INSTRUCTION SHEET

Printing: Use Tray or By-pass Tray

8.5”x11” sheets feed long edge first
11”x17” sheets feed short edge
Make sure all sheets are stacked up with the stripped edge all on one side
Do not stack more tham 25 sheets at a time
Air all sheets on both edges to make sure they are loose
Place stripped edge head first into the printer

Set Paper Type

Label 1

Pressing: A conventional home iron will not provide a satisfactory image transfer

For MATTE FINISH

Set Temperature to 330 F
Set to medium high pressure ( approx. 50lbs. Of pressure)
Cut the image out completely as there is no need to leave a border
Have to cut into image slightly so you will not see white
Peel the transfer film off the 1 STEP OPAQUE BASE PAPER by tearing one of the sides slightly.
Position transfer film on fabric item, image FACE UP, and place the COVER SHEET (SILICONE OR TEFLON SHEET) facing down onto the transfer film.
Press for 12 SECONDS
Peel off the reusable COVER SHEET after 10 second or when cold
Do not preheat garment before application

WASHING: Turn garment inside out. Machine wash in warm or cold water
Do not use fabric softner or bleach
Tumble dry on low setting do not iron on image or dry clean

FABRICS: Best performance is obtained on COTTON, POLY/COTTON,50/50 BLENDS
And untreated CANVAS

Please keep your one step opaque in plastic bags until actual use.This will keep moisture
Out of the bag. Close bag after each use.